|
Material: |
Body: A105 |
|
Nominal Pressure |
3000psi |
|
Nominal Diameter: |
3" |
|
End Sealing: |
FF |
|
Face To Face: |
|
|
Working Temperature: |
|
|
Test And Inspection: |
|
|
End Connection: |
Butt Welding |
|
NACE: |
NACE 0175 |
|
Certificate: |
ISO9001, ISO14001, ISO28001, TS, CE,TUV |
PS: We also can do according to customer's requirements.
Butt Welding
Locking Device
Grease Injection Design On Stem
DBV trunnion ball valve （DN≥150，NPS6）adopts the design of grease
injection. It is effectively avoiding the leakage caused by the stem O
rings are unexpectedly damaged.
Grease Injection Design On Seat
DBV trunnion ball valve （DN≥150，NPS6）adopts the design of grease
injection. It is effectively avoiding the leakage caused by the seat rings
are unexpectedly damaged.
Blow-off Design
When the valve is closed, the pressure in the body cavity will be
accumulated , and the pressure is removed by opening the blow-off
valve.
Drain Valve Design
The seal of the trunnion ball valve is achieved by the floating seat.When
the waste of the inner cavity is removed through drain valve, the
pressure will exist between the inlet and outlet end of the compression
seat, and it is easier to achieve the sealing performance.
Outer Trunnion Ball
The trunnion ball is the standard deisign for ball valves, which
guarantees an easy assembling into valve, a wide surface for
washers (reducing friction and torque).The ball can only turn
around its own axe (trunnion axe) and sealing is guaranteed by
the axial movement of the seats for springs or inline pressure.The
trunnion design is suggested for medium and big dimensions and
enables to avoid high torque during opening or closing phase with
inline pressure. The critical issue for these products consists in the
poor material between the bore and the washer area it occurs an
easier deformation of the ball for high pressure and consequently
leakage between seats and ball.
Inner Trunnion Ball
This structure is suitable for small size valve or higher pressure
environment. With simple design and convenient maching, this
ball guarantees a stronger resistance of the ball than the outer,
and so less deformation in high pressure condition reducing the
risk of leakage between ball and seats. However, it's critical for
the valve assembling especially for big dimensions; limited space
for washers.
Product Comparison
Appearance Dealing
Nitriding Thicken Stem Design
Factory Direct Sales
Quality Assurance
Our products are with 2 years quality assurance and lifelong maintenance.
Warranty time starts from the dispatch of the goods. Quality assurance means
all the cost arising form the quality problems caused by the manufacturer within
two years will be afforded by us.
International Logistics
Delivery Time
In general, the delivery time will be confirmed with the customer in the order,
1-2 days after getting the bank receipt or deposit , the goods will make arrangements.
Delivery Method
Shipment: CIF, FOB,etc.
Transportation: air, sea, train, logistics.
After-sales Service
Email
We have an email specialized for customer to ask the position of the shipment
and the express, also make the complain or suggestion.
Free Installation Guide
After receiving the goods, you will get a professional installation guide.
F&Q
Q1. Are you a factory or trading company?
A: We are a factory specialized in manufacturing valves over 15 years. We both have factory in Wenzhou and Shanghai.
Q2. Can I have a sample order for valve?
A: Yes, we welcome sample order to test and check quality.Mixed samples are acceptable. The sample is free.
Q3.Do you have any MOQ limit for valve order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods?
A: We usually ship by sea, by air, by courier, etc.
Q5. How to check the process of the order?
A: You can check your order on our website after we provide you account and password.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products and we could repair freely for lifelong time.
Q7: Can you print our Logo on the valves?
A:Yes, we can totally produce products according to your special request, even manufacture it base on your drawing.
Q8: How can I check your factory situation while it's difficult for me to come to China?
A：We have photos and videos on our website, youtube and facebook, It shows every step of the manufacturing.
Contact Us to Get Free Quotation 
Company Profile:
DBV VALVE GROUP CO., LTD is manufacturer of valves.
Email: info@dbv-armaturen.com
Shanghai Factory : No.255 Shenjiabang Road, Baihe Town, Qingpu District
Shanghai China.
Worm Notice:
If you like our valves, please bookmark our Facebook,Twitter, which is easier to find us.
if you need it one day in the future, we do appreciate it for your kindness.
New Product
