Name: |
WCB DN500 Wafer Triple Eccentric Butterfly Valve |
Material: |
Body: WCB; Disc: CF8, Stem: 13Cr. Seat: overlaid 304 |
Nominal Pressure: |
PN10 |
Nominal Diameter: |
DN500 |
End Connection: |
Wafer |
Structure: |
Triple Eccentricity |
Operation: |
Worm gear |
Valve type: |
Industrial Valve |
Working Temp.: |
-10℃~+120℃ |
Design Standard: |
EN593 |
Test / Inspection: |
EN12266 |
Face To Face: |
EN 558-1 |
PS: We also can do according to customer's requirements.
Oval Turtle Disc Design
DBV butterfly valve adopts the unique oval turtle
advantages such as high strength, good flow
truss structure design of the disc. It has several
characteristics and low flow-resistance coefficient.
Up Blow-out Proof Design
DBV butterfly valve adopts the design of stepped shaft
with the gland. It is effectively that prevent the stem
blows out from the top.
Internal Snap Ring and Bottom Cover Design
DBV butterfly valve adopts the unique stem design.
The bottom of the stem is slotted. The ring is embed
-ded to prevent the stem blow out. Then, the snap
bottom cover plays a same role. This design suits
for the valve which is larger than four inches.
Triple Eccentricity Design Features
The stem is offset on both the X (1)and Y (2) axis of the valve's
center line. This produces a cam一like motion. The third offset (3)
consists of an inclined conical profile machined into the valve
sealing surface. This allows rotary engagement and disengagement
of the seat and seal ring without interference. All rubbing
between seat and seal ring is thereby eliminated. Once the seat
and seal ring are fully engaged torque is applied in order to
create a bi一directional, zero leakage, metal-to一metal seal. For
this reason, triple offset valves are often defined as "torque" seated
rather than”position” seated as in the case of resilient or high performance products.
Multi-layer disc sealing ring
Multi-layer disc sealing ring adopts ss304 and graphite laminated, sealing
by the inside graphite, applied for low and middle pressure, as recycle water,
swage treatment, city building, etc.
Product Comparison
Pin Design
Bottom Cover Design
Bolt & Nut
Painting
Factory Direct Sales
Q1. Are you a factory or trading company?
A: We are a factory specialized in manufacturing valves 20 years. We both have factory in Wenzhou and Shanghai.
Q2. Can I have a sample order for valve?
A: Yes, we welcome sample order to test and check quality.Mixed samples are acceptable.
Q3.Do you have any MOQ limit for valve order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods?
A: We usually ship by sea, by air, by courier, etc.
Q5. How to check the process of the order?
A: You can check your order on our website after we provide you account and password.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products and we could repair freely for lifelong time.
Q7: Can you put our Logo on the valves?
A:Yes, we can totally produce products according to your special request, even manufacture them base on your drawing.
Q8: How can I check your factory situation while it's difficult for me to come to China?
A:We have photos and videos on our website, youtube and facebook, It shows every step of our manufacturing.
Company Profile:
DBV VALVE CO., LTD is manufacturer of valves.
Email: [email protected]
Wenzhou Factory :No.96 Fanhua East Road,OuBei,WenZhou,Zhejiang,China,325102
Worm Notice:
If you like our valves, please bookmark our Facebook,Twitter, which is
easier to find us. if you need it one day in the future, we do appreciate it
for your kindness.